Author Topic: Cut open Frigoboaat eutectic holding plate.  (Read 190 times)

bootsn

  • Administrator
  • Newbie
  • *****
  • Posts: 10
    • View Profile
Cut open Frigoboaat eutectic holding plate.
« on: April 29, 2018, 06:16:43 pm »
This Frigoboat Eutectic Holding plate was cut open to show an efficient refrigerator evaporator inside. A holding plate�s true efficiency is when compartment area heat can pass easily through plate to reach refrigerant evaporator coil. The rate of heat transfer depends on total surface area of plate. The actual amount of energy stored in eutectic plates will depend on amount of Btu stored in frozen solution approximately 144 Btu perpound.. The length of time this plate will hold a eutectic given temperature depends on its melting rate. The lower the eutectic phase change temperature the shorter the holdover time.

Click  to in large picture
« Last Edit: May 01, 2018, 06:16:38 pm by Richard »