Free Refrigeration Recommendation
Selecting the correct refrigeration system for your boat requires careful review so that you will avoid the many mistakes that have been made by others. there are several good manufacturers of boat refrigeration systems and many models to choose from, but the system that works well for one person's boat might not work in yours. I have covered some of the basics for selecting a system on my web page: www.Kollman-marine.com/selecting.html and I have also covered the subject in my manual but if you would like a more personalized recommendation, please fill in your the questions below for a FREE recommendation that takes into account your boat and your personal refrigeration needs.
Your Name:Your EMAIL Address: |
A-weekends
B-Live Aboard
C-Extended Cruises
Will you be using the boat in the tropics?
Give the make and size of your boat
Will you install your own system?
Give the make and model of your engine
What is the size of the engine cooling hose?
What is your total battery capacity in AMP hours?
If you have a high output Alternator, what are the AMP hours?
Do you have a smart regulator?
Yes No
Do you have a wind generator? If so what make is it?
Do you have an onboard generator, and if so, what is its size?
Do you have a smart battery Charger?
YesNo
Do you have an inverter and if so, what size is it?
Is the box equipped with solar panels? If so what size?
YesNo Give size of panels
Give the thickness of the box's insulation, or if you're not sure, List how long a 25# block of ice will last.
Is the refrigeration intended to be used while at dock?
YesNo
Are there any special needs for refrigeration such as medications etc.?
What is the size of the lid opening and the approximate size of the box in cubic feet?
Is there any other heavy usage DC voltage equipment such as a water maker or ham radio?
YesNo
I will need sketches of your box and since they cannot be included in a form, you will need to either draw them on a separate sheet of paper, scan them, then send them Email as an attachment or fax them to our fax at: (954)583-7156 or you may mail them to:
Kollmann Marine; 2430 Sugarloaf Lane; FT. Lauderdale, FL 33312
Please provide the following information with your sketches:
Include the interior dimensions, and if it has a curved bottom, list each end separately.- Give the lid opening size. This is very important since the plate must fit through it.
- Give a sketch of the floor plan of the boat and show the location of the ice box in relation to the engine compartment.
- Show the best location for exiting the box with the refrigerant lines.